As a Windows user, you must be ready to face every issue regarding kernel-power event ID 41 error. Just like any errors regarding the Windows system, you have many options to fix it as soon as possible. In terms of the urgency of the error, the kernel-power event ID 41 can cause fatal trouble if not fixed properly. Similarly to the Blue Screen of Death error, you cannot get rid of it unless you fix the problem.
Event ID 41 error happens during the most unexpected time. It can be quite unfortunate when you work on something and this type of error happens. When your Windows PC experiences event ID 41 error, the PC will proceed to restart at the most unexpected time. There will be no early warning as your PC will turn off at a sudden time. After a while, your Windows PC will turn back on and you will lose the data you have not saved earlier.
Due to the connection with kernel power, event ID 41 can cause such a sudden restarting process. This case usually occurs due to the system’s power failures. During the PC’s booting process, the system will perform a routine check to inspect whether or not the system was shut down properly. If it turns out that the Windows PC is not shut down properly, then you will see the “Kernel event ID 41 error” message at the display of your Windows PC screen.
Table of Contents
Methods to Fix Windows Kernel-Power Event ID 41 Error
As a busy operating system, Windows 10 faces a lot of troubles when not checked properly and regularly. Whether it be a slow performance or high memory usage, the Windows operating system can suffer the overloaded weight of processing beyond the limited space. Unlike the usual case of a CPU high-temperature issue in Windows 10 PC, you cannot easily fix the kernel-power event ID 41 error due to certain instances. The same thing goes to the cases of Blue Screen Of Death error. An “event ID 41” error can be triggered by many things and they are not easily inspected.
If the Blue Screen of Death errors tell you the cause of the problem within the system, kernel-power event ID 41 will not even have one explanation about the error. In other words, even the Windows system itself wonders about the reason the PC gets restarted without any warning. Since this type of situation can confuse some users who are not familiar with Windows 10 software and services, we have managed to gather some methods to fix the “event ID 41” error. You can first read the guide to troubleshoot the system and software processings may look abnormal and disable it temporarily to fix the error.
Since the power failure can come from the “event ID 41” error, you will have to check the PSU or the power output first. Instead of fixing the error from the inside, you can also check the hardware of your PC as well. A series of power failure issues can mostly be traced back to the problems with the hardware. If you find no errors in the power output and no problem in the hardware, you can try to perform one of the methods to fix the kernel-problem related entitled “event ID 41” error below. Take a look at each method below and see which one works for you.
Scanning for Problems Using System File Checker (SFC) and Check Disk (CHKDSK)
Whenever you find a problem within the Windows operating system, you can try to run System File Checker and Check Disk to make sure nothing goes wrong within. Just as the file and disk checkers inspect every faulty thing within the system, you can fix the problem immediately after the checkers find it. In order to perform this method to fix “event ID 41” error, you can follow the steps below.
- Head to the Command Prompt by typing the keyword in the Windows search.
- Proceed to go to the “Advanced options” to continue.
- Afterward, you can type “sfc /scannow /offbootdir=c:\ /offwindir=c:\windows” and “chkdsk c: /r” on the cmd window and press Enter after you type each one. Use the location of the drive where you save the Windows installation files.
- Once you type the commands above, you can wait for the system to proceed it.
- After the commands have proceeded, you can close the Command Prompt window and restart your Windows PC.
Run the Windows System Clean Boot
If you cannot find the culprit which causes “event ID 41” error, clean boot your Windows PC. Doing so can help you clean everything on the current Windows system. In order to perform this method, you can follow the steps below.
- Open the Run box by pressing Windows and R buttons.
- Afterward, you can type msconfig in the search box and press enter.
- You will see a new window entitled “System Configuration” on the display.
- Look at the “General” tab and select “Selective Startup”.
- Keep in mind to uncheck the option “load startup items”.
- Then, head to the “Services” tab and check the box next to the option “Hide all Microsoft services.“
- Afterward, you can click on the option “Disable all”. This option will disable every remaining service on your Windows PC.
- At last, try to restart your Windows PC after modifying some settings above.
- Once the PC turns back on, you must set the changes you make back to their original states in order to operate your PC normally.
With this method, you will be able to fix the “event ID 41” error on your Windows PC. The Memtest86+ can detect and remove all the corrupted memories. This memory test performs better than the built-in memory test since it operates outside the Windows system.
Disclaimer: you will need another working computer to download and burn the software into an external hard drive. Since this process can take a long time to operate, you can leave your PC for a while.
- Insert a blank external drive or disc into your Windows PC.
- Afterward, you can download and install Windows Memtest86 Auto-installer.
- Proceed to right-click on the downloaded file and select the “Extract here” option.
- After the extraction, you can open the folder and run the Memtest86+ USB Installer.
- Select the external drive or disc to burn the MemTest86 software.
- Then, you can insert the disc or external hard drive to the Windows PC with the kernel-power “event ID 41” error.
- Afterward, you can restart your Windows PC and boot your PC from the external drive to run the Memtest86+.
- The Memtest will begin the analysis of memory corruption within your Windows system at once.
- Make sure to pass through all the 8 phases of the test. If your Windows system has gone through all that, then your memory is working finely.
- When the Memtest86 stops at one phase, then it means there is a corrupt memory within your system. The corrupt memory can possibly cause the kernel-power “event ID 41” error.
- To fix the kernel-power “event ID 41” error, you must replace the RAM within your Windows PC after the bad memories are detected.
Modify the URL in the DeviceMetadataServiceURL
With a few modifications, you can try to fix the kernel-problem related issue named “event ID 41” error. Aside from typing a particular set of commands to launch the file and disk checkers, you can modify the URL in DeviceMetadataServiceURL. In order to perform this method, try to follow the steps below.
- Open the Run box by pressing Windows and R buttons.
- Afterward, you can type regedit on the search box and press Enter.
- Proceed to select on the option “Registry Editor” to open the Registry Editor.
- Then, type this location to the Registry Editor search box: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Device Metadata
- Alternatively, you can press Ctrl and F3 buttons and type DeviceMetadataServiceURL and click on the button “Find” or press Enter.
- Head to the option “DeviceMetadataServiceURL” on the right pane of the current window.
- Proceed to replace the value of the decided key to “http://dmd.metaservices.microsoft.com/dms/metadata.svc”.
- Once you type the modified URL, click OK and close the Registry Editor window.
Go with the Repair Install Windows
When all else fails, you can go with the repair install Windows 10 to fix the kernel-power “event ID 41” error. Just as every Windows PC which encounters problems, the repair install Windows can definitely remove all the problems on your PC. The repair install method will use the in-place upgrade in order to fix the issues with the system. You will not have to worry because this method will not delete the user data on the system.
If this method still does not fix the kernel problem “event ID 41” error on your Windows 10 PC, then it is possible that the hardware may be the problem. In order to fix this issue once and for all, you will need to get an expert’s help. You can bring your Windows PC to the service center of your PC brand. Explain the problem your PC experiences and the technician assigned to deal with your PC will fix it for you. Wait until the technician finishes inspecting your Windows PC. It will probably take a while before you can use your PC again. Nonetheless, you will get your PC back to you with the “event ID 41” error gone from the system.