Dealing with KMode Exception Not Handled error can be quite frustrating, but luckily you can easily solve this problem with the right method. In providing you with the problem solver to this issue, we have gathered several working methods to handle KMode Exception Not Handled errors. As it appears, KMode Exception Not Handled issue has happened to every single one of Windows version at least once. Mostly it is caused by the slight malfunctions in the system. Much like Service Host Superfetch, the main service of the Windows system may cause such an error to happen. The problem can come from various types of errors. The most common factors which contribute to the problem are the high memory usage or RAM and the outdated driver. By acknowledging these factors, you can start off taking care of your Windows PC and check the system regularly.
KMode Exception Not Handled may not seem familiar to common Windows users, yet a lot of Windows users have experienced this error at least once in their life. If you have not known yet, KMode Exception Not Handled often indicates a system error with the blue screen. Although the problem may not appear often these days, some of the Window users still experience it. As such, Windows will temporarily freeze as it experiences malfunctions within the system. With luck, you can simply reboot your Windows PC and get rid of the issue at once. In a rare occasion, KMode Exception Not Handled error should be handled thoroughly from within the system.
Most of the time, KMode Exception Not Handled error on Windows 7,8, or 10 happens with no prior signs. When the PC takes a lot to load, it can often reach a point where it suddenly freezes on its own. If your PC experiences this type of error, then you can try to reboot it. Remember to always boot your PC in Safe Mode so you can still make some changes despite the continuous error preventing you to do so.
About KMode Exception Not Handled
When the error gets critical, KMode Exception Not Handled on Windows 7, 8, or 10 will take the form of a blue screen. The error itself is also known as Blue Screen of Death (BSOD). It happens a lot in the old version of Windows and, occasionally, Windows 10 PC. The cause of this problem is often originated from the broken driver and high memory disk or RAM usage. If these issues are not treated properly, then your Windows computer may restart without warnings. When it gets serious, your computer may experience a restarting loop and will finally be unable to operate.
Basically, KMode Exception Not Handled issue deals with an in-depth and complicated overview of the Windows 7,8 or 10 system. KMode Exception Not Handled error occurs when the Windows 7,8, or 10 software overwrite each other’s memory. As soon as the blue screen appears, the Windows system will suffer a full crash. The crash happens because of the damage Windows PC suffers continuously. In return, the Windows error troubleshoots fail to analyze and detect the errors and find no solutions to the problems. All of these are mostly caused by a corrupted driver within the system.
Thought the error may seem incurable, a slight modification can fix the KMode Exception Not Handled error on the older versions of Windows as well as Windows 10. Take a look at further information below to understand the method to fix such an error.
Methods to Fix KMode Exception Not Handled Error
Despite how serious the error can get, KMode Exception Not Handled issue can be easily fixed with the right method. To do so, you may only reset some of the default settings on your Windows PC. It does not take a complicated technique to fix this issue quickly.
In order to help you in fixing the KMode Exception Not Handled or BSOD error on Windows 7,8, or 10 PC, we have curated a list of methods to fix it. Take a look at each one of the methods and try each to see if it works on your Windows PC.
Check Your Computer RAM
When the simple reboot does not solve the BSOD error, you can try to check your computer RAM first. It is vital that the Windows RAM usage should always be monitored when your PC experiences this error. In order to analyze the RAM usage, you can use the Windows memory diagnostics tool.
Firstly, search for the Memory Diagnostic on the Windows search bar. A list of programs will appear shortly. Among all of these programs, choose the best-matched program to continue. Once you click on it, a new window will appear. Look for the option “Restart now and check for problems” and select it. Alternatively, you can choose “Check for problems the next time I start my computer” if you have current works to save.
Automatically, the Windows tool will scan your Windows system while doing the reboot. When it finishes, you will get the report. If there are any hardware errors, it is possible that your Windows PC experiences some RAM damage. To fix this, you can remove or reset the RAM to make sure there is no loose connection. In case the KMode Exception Not Handled error on your Windows 7, 8, or 10 PC still occurs even after the RAM fix, then you may need to buy a new kit.
Windows Self Fix KMode Exception Not Handled Error
With every error occurs, Windows is equipped with its own problem-solving tools. Firstly, you need to perform an SFC Scan to look for the fault in the system. Afterward, the Windows self-fix tool will fix the problem. With the SFC Scan, you can see which Windows files work properly and which ones do not. By applying this method, you may fix the KMode Exception Not Handled error on Windows 7,8, and 10 in the process.
Follow these steps below to get rid of the KMode Exception Not Handled error.
- Press Windows and R buttons simultaneously. Hold them until a Run dialog appears.
- Soon after, a Run dialog will appear. Type in cmd in the box to open Command Prompt.
- After the Command Prompt window appears, type in command sfc /scannow and press enter.
- The scanning process will begin at once. Wait until the process is done.
- Once the scanning is done, you may proceed to restart your Windows PC.
Disable Fast Startup
If you use the new version of Windows, prominently Windows 10, you will have a Fast Startup feature on your PC. This Fast Startup feature on Windows 10 can often cause the KMode Exception Not Handled error. Since it helps to provide a fast recovery from the hibernation and shutdown state, the RAM and memory usage from this can be quite high. If you disable the Fast Startup, the Windows 10 system will manage to stay on longer and fixes this error on its own.
Follow these steps below to perform the Fast Startup disabling.
- Proceed to go to Control Panel on your Windows PC.
- Find the section for System and Security and click it.
- Afterward, look for Power Options.
- On the left menu, click on the Choose what the power buttons do.
- Choose the option Change settings that are currently available.
- Afterward, look for the blue link at the top of the page.
- Find the Shutdown settings and untick the box stating Turn on Fast Startup.
- Before you close the window, click on Save changes.
Update Windows Driver to Fix KMode Exception Not Handled
Aside from slowing down PC performance, outdated drivers can often cause the blue screen error. To fix the issue, you can update your Windows drivers. Keep in mind to always update them in Safe Mode in case you do not want to change anything other than the drivers themselves.
To get into the Safe Mode, you must boot your Windows 10 PC and interrupt the normal booting process three times. Simply turn on your Windows PC and press the power button to turn it off just right before the booting process is done. Prepare to place your finger on top of the button and press it in between or up to 4 seconds in order for the booting process to work.
Once the fourth time booting finishes, you will see your Windows system performs an automatic repair. Afterward, you can choose Advanced Options to continue. Find the option Troubleshoot and choose it. As soon as the new Window appears, select the Advanced Options and head to the Startup Settings. As the finishing touch, press number 4 on your keyboard and select Restart. Once the Windows starts booting again, press number 4 button on your keyboard and get into Safe Mode.
Perform these steps below to fix the KMode Exception Not Handled in Safe Mode.
- Press Windows and X buttons at the same time and hold them until a new window appears.
- On the new window, select Device Manager from the context menu.
- Still, on the Device Manager menu, look for the option Other Devices.
- Right-click on the Unknown Device.
- Select the option of Update Driver Software.
- When a new window appears, select “Search automatically for updated driver software” option.
- The update will start at once. Wait for a couple of minutes until it finishes.
- Once the updating process is done, restart your Windows PC.
Dealing with KMode Exception Not Handled issue on Windows 7,8, or 10 PC is not difficult at all. In fact, it may only take a couple of reboots to get rid of the issue. In case the problem still persists, you must perform one of these methods above. When the problem still appears after you do all of those, then the hardware of your Windows PC may be damaged. The last choice you can do to fix this is by installing a new Windows 10 on your computer. If the problem still appears even after the system reinstallation, then the cause will probably be the old BIOS version of the PC.