If your Windows PC experiences the problem with a notification stating “the file is too large for the destination file system“, then you must fix the error. This type of error usually occurs when you transfer a file with big size to another drive. Normally, you can send any types of files with any sizes to an external hard drive if the storage is sufficient. “The file is too large for the destination file system” should only happen when the destination drive has less than sufficient storage. This type of error differs from the likes of external hard drive not showing up and NVIDIA missing control panel. Therefore, it can certainly be solved with a different type of command.
Despite the limited nature of an external drive’s storage, this type of problem should not happen when the storage space is sufficient to store a big sized file. In this case, the large file is not the problem but rather the hard drive and the slight error in the settings.
The problem in this type of error mostly revolves around the external hard drive settings. If you can change the settings, then “the file is too large for the destination file system” error will probably stop happening. A file with a size of more than 2 GB can still be sent to a USB Flash drive or hard drive with sufficient space. Changing the settings to fix this error will not take a lot of time. Once you change the FAT32 system of your hard drive, you will be able to send the big file without any interference.
Table of Contents
The File is Too Large for FAT32 File System
Long ago, Windows used a FAT file system on its hard drive. Afterward, an updated FAT system has long been used on Windows 95 OSR2, Windows 98, and Windows Me. The file system storing is called FAT32 which provides a default cluster size as small as 4KB. In addition to that, FAT32 also includes supports for EIDE hard drive size which can be larger than 2 GB. However, the FAT32 era has come to a pass and the Windows file system is now replaced by the new one.
Since it is required today to move and copy files with large size, Windows has come with an idea of a file system improvement. Nowadays Windows does not use the FAT system any longer. Since FAT cannot support files with large size, this type of file system is updated once more. Ever since the introduction of Windows XP, the FAT32 has now been replaced by New Technology Files System, short of NTFS.
Due to the inability of FAT32 to transfer large files, you can simply change the file system settings. Once you change the FAT32 system, you will be able to send a large file to the destination file system seamlessly. In order to fix “the file is too large for the destination file system” error, you can perform the methods we have curated below.
How to Fix “The File is Too Large for The Destination File System” Error
Contrary to any Windows system errors, like “Reboot and Select Proper Boot Device” and System Service Exception, the too large issue can be simply fixed with a simple command prompt.
Try one of these methods and see which one works for your Windows PC.
Changing FAT32 to NTFS Securely
- Open the Command Prompt as Admin by pressing Windows and X buttons at the same time.
- Take a look at the letter used for your USB flash drive or your external hard drive.
- Type in the following command to the cmd window and press Enter as soon as you finish typing it. Write the exact letter of your external drive on the command prompt.
Convert F: /fs:ntfs /nosecurity
4. The effect will take a few minutes. Wait until the command finishes the converting process.
5. In case the command does not work, you can perform Chkdsk (Check Disk) command to repair the drive.
6. You can type in chkdsk g:/f and press Enter on the command prompt.
Keep in mind to write the letter of the drive accordingly.
7. Once again open the command prompt and type in Convert G: /fs:ntfs /nosecurity.
8. Try to copy the large file you had a problem with before.
If the transferring process finishes without a problem, then you can safely send any types of files as long as you have sufficient space.
Format the External Drive Using NTFS File System
If the simple command cannot fix “the file is too large for the destination file system” error, then you can try to format the external drive using the NTFS file system. Follow the steps below to get this method to work.
- Locate your external hard drive and right-click on it.
- Afterward, select the option “Format”.
- You will see several file system options on the Format window. Select the NTFS file system.
- Afterward, choose “Allocation unit size” and select Default.
- Proceed to click Start to format the hard drive.
- Click OK when the confirmation window appears.
- Wait until the formatting process finishes.
- Try to send the large file again to the destination drive.
Normally, you can send any types of files with any sizes to an external hard drive if the storage is sufficient. “The file is too large for the destination file system” should only happen when the destination drive has less than sufficient storage. Though the external drive tends to limit the storage space, you can still receive files with sufficient space. In this case, the large file is not the problem. You can simply change the hard drive file system and sets a few things differently.
If you can change the settings, then “the file is too large for the destination file system” error will probably stop happening. Once you change the hard drive setting, you can possibly send the file you want without any problems. Changing the settings to fix this error will not take a lot of time. After you change the FAT32 system of your hard drive, you will be able to send the big file without any interference. Since the old file system does not support large files, you can use the NTFS file system now. If you wish to transfer files from another computer, then your external drive will not meet the same problem anymore.